Engine - U.S. EPA Tier 2/3 Equivalent
- Engine Model
-
Cat® C18
- Engine Power - Net SAE J1349/ISO 9249
-
452 HP
- Bore
-
6 in³
- Stroke
-
7 in
- Displacement
-
1,106 in³
- Engine Power - Gross SAE J1995
-
487 HP
- Engine Power - ISO 14396
-
479 HP
- Emissions
-
U.S. EPA Tier 2 or Tier 3 equivalent
- Note (1)
-
All engine ratings apply at 1,750 rpm.
- Note (2)
-
No derating required up to 4267 m (14,000 ft) altitude.
Engine - U.S. EPA Tier 4 Final/EU Stage V
- Engine Model
-
Cat® C18
- Bore
-
6 in³
- Stroke
-
7 in³
- Displacement
-
1,106 in³
- Engine Power - Gross SAE J1995
-
477 HP
- Engine Power - ISO 14396
-
468 HP
- Engine Power - Net SAE J1349/ISO 9249
-
440 HP
- Emissions
-
U.S. EPA Tier 4 / EU Stage V
- Note (1)
-
All Engine ratings apply at 1,750 rpm.
- Note (2)
-
No derating required up to 2499 m (8,200 ft).
FLUID CAPACITIES
- Fuel Tank (Splash Fill)
-
254 gal (US)
- DEF Tank (Tier 4 only)
-
10 gal (US)
- Fuel Tank (Fast Fill)
-
248 gal (US)
- Cooling System
-
21 gal (US)
- Engine Crankcase*
-
10 gal (US)
- Powertrain
-
40 gal (US)
- Final Drives (each)
-
4 gal (US)
- Roller Frames (each)
-
12 gal (US)
- Pivot Shaft Oil
-
8 gal (US)
- Hydraulic System Tank
-
24 gal (US)
- Note
-
*With oil filters.
- Note 2
-
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
- Note 3
-
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
- Note 4
-
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Weights
- Operating Weight
-
110,225 lb
- Shipping Weight
-
84,373 lb
- Note (1)
-
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
- Note (2)
-
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Hydraulic Controls
- Pump Type
-
Piston-type geared to flywheel
- Pump Output - Steering
-
96 gal/min
- Fan Pump
-
21 gal/min
- Tilt Cylinder Flow - Rod End Flow
-
53 gal/min
- Tilt Cylinder Flow - Head End Flow
-
53 gal/min
- Lift Cylinder Relief Valve Setting
-
3,800 lbf/in
- Tilt Cylinder Relief Valve Setting
-
2,799 psi
- Ripper - Lift - Relief Valve Setting
-
3,800 psi
- Ripper - Pitch - Relief Valve Setting
-
3,800 psi
- Steering System - Pressure
-
5,874 psi
- Tank Capacity
-
24 gal/min
- Note (1)
-
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
- Note (2)
-
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
- Note (3)
-
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Undercarriage
- Shoe Type
-
Extreme Service
- Width - Shoe
-
24 in
- Shoes/Side
-
43
- Grouser Height
-
3 in
- Pitch
-
9 in
- Ground Clearance
-
18 in
- Track Gauge
-
89 in
- Length - Track on Ground
-
137 in
- Ground Contact Area
-
46 ft²
- Track Rollers/Side
-
8
- Number of Carrier Rollers
-
1 per side (optional)
Steering and Brakes
- Steering Type
-
Differential
- Brake Type
-
Spring Applied Wet Disc
- Brake Count
-
8
- Brake Diameter
-
16 in
Air Conditioning System
- Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Standards
- ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
- FOPS
-
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
- Sound
-
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
- Sound (1)
-
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
- Sound (2)
-
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Transmission
- 1.0 Forward
-
2 mile/h
- 2.0 Forward
-
4 mile/h
- 3.0 Forward
-
7 mile/h
- 1.0 Reverse
-
3 mile/h
- 2.0 Reverse
-
5 mile/h
- 3.0 Reverse
-
8 mile/h
- Type
-
Planetary powershift
Blade - Semi-Universal
- Blade Capacity (SAE J1265)
-
18 yd³
- Blade Width (over end bits)
-
171 in
- Blade Height
-
76 in
- Maximum Digging Depth
-
24 in
- Ground Clearance at Full Lift
-
56 in
- Maximum Tilt
-
37 in
- Blade Weight
-
10,587 lb
- Total Operating Weight* (with blade and single-shank ripper)
-
110,205 lb
- Note
-
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal
- Blade Capacity (SAE J1265)
-
22 yd³
- Blade Width (over end bits)
-
184 in
- Blade Height
-
76 in
- Maximum Digging Depth
-
24 in
- Ground Clearance at Full Lift
-
56 in
- Maximum Tilt
-
40 in
- Blade Weight
-
12,016 lb
- Total Operating Weight* (with blade and single-shank ripper)
-
111,362 lb
- Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Single Shank
- Maximum penetration force * (shank vertical)
-
35,520 lbf
- Maximum penetration depth (standard tip)
-
49 in
- Pryout Force
-
74,637 lbf
- Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
35 in
- Number of Pockets
-
1
- Weight
-
10,701 lb
- Total Operating Weight* (with SU Blade and noted ripper)
-
110,205 lb
- Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type.
Ripper - Single Shank, Deep Ripping
- Maximum penetration force * (shank vertical)
-
38,667 lbf
- Maximum penetration depth (standard tip)
-
68 in
- Pryout Force
-
74,412 lbf
- Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
32 in
- Number of Pockets
-
1
- Weight
-
10,981 lb
- Total Operating Weight* (with SU Blade and noted ripper)
-
110,485 lb
- Note
-
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Multi-Shank, Adjustable Parallelogram
- Maximum Penetration Force - Shank Vertical
-
34,621 lbf
- Maximum Penetration - Standard Tip
-
31 in
- Pry-Out Force - Multi-Shank Ripper with One Tooth
-
81,156 lbf
- Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
35 in
- Number of Pockets
-
3
- Weight
-
12,136 lb
- Total Operating Weight* - With SU-Blade and Ripper
-
111,739 lb
- Note
-
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Winches
- Winch Model
-
PA 140VS
- Weight*
-
3,950 lb
- Oil Capacity
-
4 gal (US)
- Drum Width
-
13 in
- Wire Cable Diameter - Recommended
-
1 in
- Wire Cable Diameter - Optional
-
1 ft
- Maximum Drum Capacity - Recommended Cable Length
-
257 in
- Maximum Drum Capacity - Optional Cable Length
-
204 ft
- Wire Cable Ferrule Size - Outside Diameter
-
2 in
- Wire Cable Ferrule Size - Length
-
3 in
- Note
-
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
- Note (2)
-
Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
Dimensions (Approximate)
- Ground Clearance*
-
18 in
- Track Gauge
-
89 in
- Width - Without Trunnions - Standard Shoe
-
113 in
- Width - Over Trunnions
-
130 in
- Height - FOPS Cab*
-
150 in
- Height - Top of Stack*
-
153 in
- Height - ROPS/Canopy*
-
158 in
- Drawbar Height (Center of Clevis)*
-
30 in
- Length - Track on Ground
-
137 in
- Overall Length - Basic Tractor
-
193 in
- Length - Basic Tractor - With Drawbar
-
206 in
- Length - Basic Tractor - With Winch
-
218 in
- Length - With SU-Blade**
-
260 in
- Length - With U-Blade
-
274 in
- Length - With Single-Shank Ripper
-
257 in
- Length - With Multi-Shank Ripper
-
257 in
- Overall Length - SU-Blade/SS Ripper
-
324 in
- Note (1)
-
*Includes grouser height for total dimensions on hard surfaces.
Weights - Waste Handler
- Note (2)
-
257