302.7 CR Mini Hydraulic Excavator

Exterior View
Interior View

Request a Quote

Engine

Net Power: 24 HP
Engine Model: C1.1 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC: 24 HP
Note: Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Bore: 3 in
Displacement: 69 in³
Emissions: Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Stroke: 3 in
Gross Power - 2,400 rpm - SAE J1995:2014: 25 HP

Weights

Operating Weight: 6,725 lb
Minimum Operating Weight with Canopy*: 5,645 lb
Maximum Operating Weight with Canopy**: 6,450 lb
Minimum Operating Weight with Cab*: 5,909 lb
EU: CE Plate Weight with Canopy***: 5,942 lb
EU: CE Plate Weight with Cab***: 6,174 lb
Note (2): **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight.
Note (1): *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight.
Maximum Operating Weight with Cab**: 6,725 lb
Note (3): ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.

Weight Increase from Minimum Configuration

Long Stick: 33 lb
Steel Tracks: 221 lb
Cab: 276 lb
Counterweight (extra): 551 lb
Counterweight (light): 221 lb

Travel System

Ground Pressure - Maximum Weight: 4 psi
Ground Pressure - Minimum Weight: 4 psi
Travel Speed - Low: 2 mile/h
Gradeability - Maximum: 30 degrees
Maximum Traction Force - High Speed: 3,507 lbf
Travel Speed - High: 3 mile/h
Maximum Traction Force - Low Speed: 6,025 lbf

Service Refill Capacities

Hydraulic System: 9 gal (US)
Hydraulic Tank: 5 gal (US)
Fuel Tank: 12 gal (US)
Engine Oil: 1 gal (US)
Cooling System: 1 gal (US)

Hydraulic System

Digging Force - Stick - Standard: 3,102 lbf
Auxiliary Circuit - Primary - Pressure: 3,553 psi
Operating Pressure - Swing: 2,553 psi
Auxiliary Circuit - Secondary - Flow: 7 gal/min
Auxiliary Circuit - Primary - Flow: 17 gal/min
Auxiliary Circuit - Secondary - Pressure: 3,553 psi
Operating Pressure - Equipment: 3,553 psi
Digging Force - Stick - Long: 2,765 lbf
Digging Force - Bucket: 5,238 lbf
Operating Pressure - Travel: 3,553 psi
Pump Flow at 2,400 rpm: 26 gal/min
Type: Load Sensing Hydraulics with Variable Displacement Piston Pump
Note: Flow and pressure are not combinable. Under load, as flow rises pressure goes down.

Swing System

Machine Swing Speed: 9 r/min
Boom Swing - Left: 75 Degrees
Boom Swing - Right: 50 Degrees

Blade

Height: 13 in
Width: 62 in

Certification - Cab and Canopy

Top Guard: ISO 10262:1998 (Level I)
Tip Over Protective Structure (TOPS): ISO 12117:1997
Roll Over Protective Structure (ROPS): ISO 12117-2:2008

Sound

Operator Sound Pressure (ISO 6396:2008): 78 dB(A)
Average Exterior Sound Pressure (ISO 6395:2008): 94 dB(A)
Note: European Union Directive “2000/14/EC”

Dimensions - Standard Stick

Overall Shipping Length*: 167 in
Boom In Reach: 67 in
O/A Shipping Height: 98 in
Swing Bearing - Height: 22 in
Stick Length: 42 in
Maximum Reach: 184 in
Maximum Dump Clearance: 116 in
Maximum Dig Height: 168 in
Tail Swing without Counterweight: 31 in
Tail Swing with Extra Counterweight: 35 in
Boom Swing - Right: 33 in
O/A Undercarriage Length: 79 in
Vertical Wall: 74 in
Note: *Overall Shipping Length depends on blade position during shipment.
Maximum Reach - Ground Level: 178 in
Dig Depth: 99 in
Track Belt/Shoe Width: 12 in
Maximum Blade Height: 16 in
Maximum Blade Depth: 20 in
Boom Swing - Left: 24 in
Ground Clearance: 12 in
Boom Height - Shipping Position: 61 in
Tail Swing - with Light Counterweight: 33 in

Dimensions - Long Stick

Dig Depth: 107 in
Boom Height - Shipping Position: 65 in
Boom Swing - Right: 33 in
Maximum Reach - Ground Level: 185 in
Maximum Blade Height: 16 in
Maximum Reach: 191 in
Boom Swing - Left: 24 in
Maximum Blade Depth: 20 in
O/A Shipping Height: 98 in
Maximum Dig Height: 173 in
Stick Length: 50 in
Tail Swing without Counterweight: 31 in
Boom In Reach: 68 in
Maximum Dump Clearance: 121 in
Swing Bearing - Height: 22 in
Vertical Wall: 81 in
O/A Undercarriage Length: 79 in
Ground Clearance: 12 in
Track Belt/Shoe Width: 12 in
Overall Shipping Length*: 169 in
Note: *Overall Shipping Length depends on blade position during shipment.
Tail Swing - with Extra Counterweight: 35 in
Track Width: 62 in
Tail Swing - with Light Counterweight: 33 in

Sustainability

Recyclability: 95%

ALL DAY COMFORT

Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage let you access and work in the tightest areas. Dozer float allows for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab or canopy lets you reach additional service areas when needed.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.

SUSTAINABILITY

The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

Engine
- Cat^® C1.1 Turbo Engine (U.S. EPA Tier 4 Final/EU Stage V)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Two Speed Travel
- Fuel Water Separator
- Power on Demand (not available in all regions)
- Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
Hydraulics
- Smart Tech Electronic Pump
- Accumulator
- Automatic Swing Brake
- Auxiliary Hydraulic Lines
- One and Two Way Auxiliary Flow
- Continuous Auxiliary Flow
- Auxiliary Line Quick Disconnects
Operator Environment
- Tilt-up Canopy or Tilt-Up Cab
- Top Guard ISO 10262:1998 Level I
- ROPS – ISO 12117-2:2008
- TOPS – ISO 12117:1997
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer (optional in some regions)
- Adjustable Wrist Rests
- Washable Floor Mat
- Travel Pedals and Hand Levers
- Machine Security
- Standard Key with Pass Code
- Fabric Suspension Seat (Cab only)
- Vinyl Suspension Seat (Canopy only)
- Hydraulic Lockout – All Controls
- Retractable High Visibility Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- Storage Pocket
- Skylight
- Mounting Bosses for Front
- Signaling/Warning Horn
- Interior Light (Cab only)
- Boom Light, Halogen (not available in all regions)
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)
  – Fuel Level and Coolant Temperature Gauges
  – Maintenance and Machine Monitoring
  – Performance and Machine Adjustments
  – Numeric Security Code
  – Multiple Languages
  – Hour Meter with Wake Up Switch
  – Jog Dial (Cab only)
Undercarriage
- Rubber Belt (300 mm/11.8 in wide)
- Dozer Blade
- Dozer Blade Float
- Tie Downs on Track Frame
Boom, Stick And Linkages
- One Piece Boom (2085 mm/82.1 in)
- Standard Stick (1060 mm/41.7 in)
- Front Shovel Capable
- Front Shovel Capable – Pin-On
- Thumb Ready (not available in all regions)
- Certified Lifting Eye (optional in some regions)
Electrical
- 12 Volt Battery
- Software (machine and monitor)
- Maintenance Free Battery
- Battery Disconnect
- Signaling/Warning Horn
- 12 Volt Power Socket

Operator Environment
- Cab with Air Conditioning
- Cab with Heater
- No Travel Pedals and Hand Levers (optional in some regions)
- Push to Start with Key Fob/Pass Code
- Vinyl Non-Suspension Seat (Canopy only) (not available in all regions)
- LED Front Lights
- LED Front and Rear Lights
- LED Boom Light
- Mirrors Left and Right
- Radio – Bluetooth^®, Auxiliary, Microphone, USB (charging only) (Cab only)
- Next Generation Advanced Monitor
  – Touchscreen
  – Site Reference System
  – High Definition Camera Capable (IP68 and IP69K)
  – Numeric Security Code
Undercarriage
- Steel Track (300 mm/11.8 in wide)
Boom, Stick And Linkages
- Long Stick (1260 mm/49.6 in)
- Front Shovel Capable – Dual Lock Manual Coupler
- Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Bucket Divert Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Hydraulic Quick Coupler Lines (not available in all regions)
Electrical
- Product Link PL243 (regulations apply)
- Product Link PLE643 (regulations apply)
- Travel Alarm (standard in some regions)
Guarding
- Polycarbonate Half Height Front Guard (Canopy only)
- Polycarbonate Front Guard (ISO 10262 1998 Level I and EN356 P5A)
Other
- Bio Oil Capable
- Eco Drain
- Water Jacket Heater
- Light Counterweight (100 kg/221 lb)
- Extra Counterweight (250 kg/551 lb)