TL1055 Telehandler - Thompson Machinery

Request a Quote

Engine

Engine Model: Cat® C3.6L*
Gross Power - Basic: 134 HP
Note: *Meets U.S. EPA Tier 4 Final emission standards.

Operating Specifications

Rated Load Capacity: 10,000 lb
Maximum Lift Height: 55 ft
Maximum Forward Reach: 42 ft
Top Travel Speed: 21 mile/h
Capacity at Maximum Reach (o/r Down): 2,500 lb
Drawbar Pull - Loaded: 26,510 lbf
Capacity at Maximum Height (o/r Down): 5,000 lb
Frame Leveling: 10°
Maximum Lift Height (o/r Down): 55 ft
Turning Radius - Over Tires: 14 ft
Maximum Rated Load Capacity: 10,000 lb
Operating Weight: 31,700 lb

Hydraulic System

Pump Type: Variable displacement load sensing axial piston pump
Auxiliary Hydraulic Pressure: 3,307 psi
Auxiliary Hydraulic Flow: 25 gal/min

Service Refill Capacities

Fuel Tank: 38 gal (US)
Diesel Exhaust Fluid (DEF) Tank: 6 gal (US)
Hydraulic System: 49 gal (US)

Axles

Types (1): Trunnion mounted planetary 55-degree steer axles
Types (2): High bias limited slip differential on front axle

Braking System

Service Brakes: Inboard wet disc brakes on front and rear axles
Parking Brakes: Wet disc, spring applied hydraulic release on front axle

Transmission Speeds

Forward: 4 Speeds
Reverse: 3 Speeds

Tires

Standard: 400/75-28 Duraforce Air
Optional: 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam

Boom Performance

Boom Up: 15 s
Boom Down: 13 s
Tele In: 15 s
Tele Out: 20 s

Optional Work Tool Attachments

Carriages: Standard Tilt - Option 3: 72 in
Fork Mounted - Work Platform: 1220 mm × 2438 mm (4 ft × 8 ft)
Carriages: Standard Tilt - Option 1: 50 in
Forks: Pallet - Option 2: 60 in
Carriages: Side Tilt - Option 1: 50 in
Truss with Winch - Option 1: 3 ft
Truss with Winch - Option 2: 12 ft
Carriages: Dual Hydraulic Fork Positioner - Option 1: 50 in
Buckets: Multi Purpose: 1 yd³
Carriages: Dual Hydraulic Fork Positioner - Option 2: 72 in
Forks: Pallet - Option 3: 72 in
Material Handling Arm: Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
Forks: Lumber: 60 in
Forks: Pallet - Option 1: 48 in
Carriages: Swing, 100°: 72 in
Fork Extensions*: 90 in
Buckets: General Purpose - Option 2: 2 yd³
Buckets: Grapple: 2 yd³
Carriages: Standard Tilt - Option 2: 60 in
Fork Mounted - Hook: Lifting Hook
Carriages: Side Tilt - Option 2: 72 in
Truss Booms - Option 2: 15 ft
Forks: Block/Cubing: 48 in
Buckets: General Purpose - Option 1: 1 yd³
Note: *For use with 1525 mm (60 in) forks or larger
Truss Booms - Option 1: 12 ft
Carriages: Side Shift: 50 in
Fork Mounted - Truss Boom: Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
Coupler: Hydraulic IT Coupler (Includes Auxiliary Electronics)
Fork Mounted - Hopper: Trash Hopper

Work Tools

Fork Extensions*: 90 in
Lumber Forks - Option 2: [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Carriages - Dual Positioning: 50 in
Carriages - Standard Tilt: 50 in
Cubing Forks: [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Standard Rotate: 50 in
Hydraulic IT Coupler: Includes Auxiliary Electronics
Pallet Forks - Option 2: [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Note: *For use with 1525 mm (60 in) forks or larger
Carriages - Side Shift: 50 in
Lumber Forks - Option 1: [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Pallet Forks - Option 1: [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)

Weights

Operating Weight: 31,700 lb

Operator Station

Ease of Operation

Performance

Power Train

Versatility

Cost of Ownership

Serviceability and Customer Support

Telescopic Boom
- Boom angle indicator
Electrical
- Alternator, 60 amp, 12 volt
- Battery, 12 volt, 1000 CCA
- Horn
- Alarm, backup
Operator Station
- Canopy, ROPS/FOPS
- Joystick, single electronic
- Adjustable joystick wristrest
- Grab bars for easy entry
- Seat - vinyl, suspension with Cat logo
- Steering wheel spinner knob
- Floor mat - heavy duty
- Left side rear view mirror
- Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
- Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
- Park Brake with indicator light
- Steering Wheel with Cat logo
- Cat keys and locks
- Brakes - wet disc service
- Belt, seat - 3" wide
Power Train
- Engine, Cat C3.6L - 100 kW (134 hp) gross horsepower
- Thermal starting aid
- Transmission, Cat PG145 6 speed Power-shift, 4-speed forward, 3-speed reverse
- Cat filters, hoses and couplings
- Axles - Dana
- Steering - 4 wheel
- Drive - 4 wheel
Structure
- Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
- Cat IT Coupler
Anti-freeze
- Coolant - Anti-freeze, 50/50 Mix
Tires
- Tires - 370/75-28 Duraforce Air
Other Equipment
- Integrated lift and tie down points
- Standard Cat color paint
- Auxillary hydraulics for auxillary attachments (one function)

Telescopic Boom
- Hydraulic IT Coupler (includes Auxiliary Electrics)
Electrical
- Work Light Group: 3 Cab mounted Lights -- 2 forward, 1 rearward; 1 reversing light; 2 Boom mounted Lights, 1 rotating beacon
- Engine heater block
- Heater - open cab
- Road Light Group -- Headlights, Brake Lights, Turn Signals
Operator Station
- Air conditioning
- Single Joystick - with Rocker Switch
- EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
- Skylight Wiper
- Brick guard - Front and top.
Tires
- Tires - 370/75-28 Duraforce Foam Fill
- Tires - 315/95-28 Telemaster Solid
- Tire - 14.00-24 16PR Air
- Tire - 14.00-24 12 PR Foam
- Tires - 370/75-28 Non-Marking Air
Other Equipment
- Fenders
- Tow Hook - Pintle Type
- Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater
Work Tools
- Carriage - side shift, 50 in. (available from factory)
- Lifting Hook - fork mounted (available from factory)
- Truss Broom
- Carriage - standard tilt, 50 in. (available from factory)
- Carriage - standard rotate, 50 in. (available from factory)
- Carriage - swing, 72 in., 100 degrees, 9,000 lb. capacity, 5,000 lb. swung (available from factory)
- Pallet Forks - two 60 in, 2 in x 6 in, 9,000 lb. capacity per pair (available from factory)
- Pallet Forks - two 48 in, 2.36 in x 4 in, 9,000 lb. capacity per pair (available from factory)
- Cubing Forks - two 48 in, 2 in x 2 in, 3,800 lb. capacity per pair (available from factory)
- Bucket - General Purpose 1.3 Cu. Yd.
- Bucket - Material Handling 1.95 Cu. Yd.
- Bucket - Multi-Purpose, 1.3 Cu. Yd.
- Work Platform -- 8 ft x 4 ft with maximum capacity of 1,000 lbs. Includes enclosed fork pockets, side entry/exit gate, removable front rail and wire mesh floor