AD45 Underground Articulated Truck

Overview
Engine Model
Cat® C18
Engine Gross Power - ISO 14396
599 HP
Bore
6 in

Engine

Engine Model
Cat® C18
Engine Gross Power - ISO 14396
599 HP
Bore
6 in
Stroke
7 in
Displacement
1,105 in³
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (5)
Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.
Note (4)
Optional Ventilation Reduction Package available.
Note (3)
Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.
Note (1)
Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.
Emissions - EU Stage V Engine - Net Power - SAE J1349:2011
573 HP
Emissions - EU Stage V Engine - Engine Power - ISO 14396:2002
599 HP
Emissions - Ventilation Reduction (VR) Engine - Net Power - SAE J1349:2011
563 HP
Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Engine Power - ISO 14396:2002
589 HP
Emissions - U.S. EPA Tier 3/EU Stage IIIA Equivalent Engine - Net Power - SAE J1349:2011
563 HP
Emissions - Ventilation Reduction (VR) Engine - Engine Power - ISO 14396:2002
589 HP
Note (6)
Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (7)
*<5 %

Operating Specifications

Nominal Payload Capacity
99,208 lb
Gross Machine Mass
196,765 lb
Body Capacities
18.0-25.1 m³ (23.5-32.8 yd³)
Shipping Mass (Stage V Engine Model)
96,225 lb
Shipping Mass (Other Engine Models)
94,415 lb

Weights (Stage V Engine Model)

Operating Mass + Rated Payload
190,495 lb
Operating Mass - Rear Axle
26,720 lb
Operating Mass
91,285 lb
Operating Mass + Rated Payload - Rear Axle
101,260 lb
Operating Mass - Front Axle
64,565 lb
Operating Mass + Rated Payload - Front Axle
89,235 lb

Weights (Other Engine Models)

Operating Mass - Rear Axle
27,095 lb
Operating Mass + Rated Payload - Front Axle
85,355 lb
Operating Mass - Front Axle
61,225 lb
Operating Mass + Rated Payload
187,530 lb
Operating Mass
88,320 lb
Operating Mass + Rated Payload - Rear Axle
102,175 lb

Weight Distribution (Stage V Engine Model)

Empty - Front Axle
70.7%
Loaded - Rear Axle
53.2%
Empty - Rear Axle
29.3%
Loaded - Front Axle
46.8%

Weight Distribution (Other Engine Models)

Loaded - Rear Axle
54.5%
Empty - Rear Axle
30.7%
Empty - Front Axle
69.3%
Loaded - Front Axle
45.5%

Transmission

Forward - 1
4 mile/h
Forward - 2
6 mile/h
Forward - 3
8 mile/h
Forward - 4
11 mile/h
Forward - 5
15 mile/h
Forward - 6
20 mile/h
Forward - 7
26 mile/h
Reverse - 1
4 mile/h
Reverse - 2
6 mile/h
Note
Maximum travel speeds with standard 29.5 × R29 tires.

Final Drives

Differential Ratio
3.46:1
Final Drive Ratio
5.65:1
Total Reduction Ratio
19.55:1

Body Hoist (Stage V Engine Model)

Lower
21 Seconds
Total Cycle Time
36 Seconds
Raise
15 Seconds

Body Hoist (Other Engine Models)

Total Cycle Time
35 Seconds
Raise
14 Seconds
Lower
21 Seconds

Body Capacities

Ejector Body
30 yd³
Note
Heaped SAE 2:1.
Dump Body - 2 - Standard
28 yd³
Dump Body - 1
24 yd³
Dump Body - 3
33 yd³

Turning Dimensions

Articulation Angle
42.5°
Frame Oscillation
10°
Outside Clearance Radius*
371 in
Inside Clearance Radius*
209 in
Note
*Clearance dimensions are for reference only.

Service Refill Capacities

Engine Crankcase - With Filter
17 gal (US)
Transmission
16 gal (US)
Hydraulic Tank
70 gal (US)
Cooling System
23 gal (US)
Front Differential and Final Drives
20 gal (US)
Rear Differential and Final Drives
22 gal (US)
Fuel Tank
202 gal (US)

Tires

Tire Size
29.5 × R29

Standards

Standards
ROPS/FOPS Certified Cab

Power Train – Engine – Emission reduction options to meet your mine’s requirement.

Power Train – Transmission – More power to the ground for greater productivity.

Engine/Power Train Integration – Intelligent electronics for overall optimal performance.

Cat® Brake System – Superior control for operator confidence.

Operator Comfort – Ergonomically designed for all-day comfort, control and productivity.

Truck Body Systems – Rugged performance and reliability in tough underground mining applications.

Structures – Rugged Cat structures – the backbone of the AD45’s durability.

Serviceability – More time for production.

Customer Support – Cat dealer services keep underground mining equipment productive.

Safety – Designed with safety as the first priority.

Manufacturing – A Focus on Quality and Safety

  • Electrical
    • 12V power supply in cab
    • Alternator, 95-amp
    • Auxiliary start receptacle
    • Battery disconnect switch, ground level
    • Circuit breaker, 80-amp
    • Corrosive protection spray
    • Diagnostic connector
    • Electric starting, 24V
    • Engine shutdown switch, ground level
      – Front left hand side
    • Lighting
      – Headlights with dimmer switch, LED
      – Brake and tail lights
      – Rear work light (cab mounted), LED
      – Reversing lights, LED
    • Low maintenance batteries
    • Reversing alarm
    • Starting and charging system
  • Operator Environment
    • Cat Electronic Monitoring System (Cat EMS)
    • Electric horns
    • Gauges
      – Engine coolant temperature
      – Transmission coolant temperature
      – Hydraulic oil temperature
      – Fuel level
      – Speedometer
      – Tachometer
    • Indicator lights
      – Alert warning light
      – Body up position warning
      – High beam
      – Residual brake pressure warning
      – Retarder application
      – Turn signal
    • Low hydraulic level warning
    • Open operator station ROPS/FOPS structure
    • Operator presence system (auto park brake)
    • Rearview mirrors
    • Suspension seat Cat Comfort TLV2 with retractable seat belt
    • Trainer/passenger seat and seat belt
    • Tilt/telescopic steering wheel
    • Turn signal indicators
  • Power Train
    • Cat C18 ATAAC diesel engine, 6-cylinder
    • Automatic brake retarder control
    • Auto shift transmission 7 speed forward/2 speed reverse
    • Control throttle shifting
    • Engine air intake precleaner
    • Electric fuel priming pump
    • Exhaust, turbo compartment shielding
    • Four wheel drive
    • Long life coolant
    • Programmable ground speed limiting
    • Programmable gear block out with tray up
    • Radiator cap manual release
    • Radiator, cross flow
    • SAFR full hydraulic enclosed wet, multiple-disc brakes, oil cooled
    • Torque converter, standard with automatic lockup
  • Other Standard Equipment
    • Body, dump, (21.3 m³, 27.9 yd³)
    • Catalytic exhaust purifier/muffler group
    • Centralized lubrication points
    • Decals, international picto graphics
    • Dual fuel tanks
    • Engine and transmission belly guards
    • Fenders, front, rear flaps
    • Fire wall
    • Fuel system manual shut off tap
    • Front axle suspension
    • Frame lifting lugs
    • Front and rear tow pin
    • Front rubber bumpers
    • Gauges, brake pressure
    • Hand hold (access on/off top deck)
    • Hitch, articulated and oscillated
    • Operation and Maintenance Manual – English and other applicable local languages to select
    • S·O·S port
      – Coolant
      – Engine oil
      – Hydraulic oil
      – Transmission oil
    • Swing out radiator grill
    • Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.
  • Optional Equipment
    • Battery shutdown
      – Ground level isolation, in cab isolation switch
      – Ground level isolation, engine shutdown switch
      – Ground level isolation, in cab isolation, engine shutdown switch
    • Body dump
      – Body (18.0 m³, 23.5 yd³)
      – Body (25.1 m³, 32.8 yd³)
    • Body ejector
      – Ejector (22.9 m³, 30.0 yd³)
    • Body liners, impact and/or wear
      – 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
      – 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
      – 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
      – 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)
    • Body wear plate, external
      – 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
      – 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
      – 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)
    • Camera
      – Color rear facing
      – Color loading
    • Cover, anti vandalism for shipping
    • Engine options
      – Engine, Stage V
      – Engine, Ventilation Reduction (VR)
      – Equivalent to Tier 3
      – After-treatment options (for use with VR Engine only)
    • DPF (Flow Through) Filter
    • Fast fill system
      – Coolant
      – Engine oil
      – Fuel (dual tanks)
      – Hydraulic oil
      – Transmission oil
    • Fire suppression system
      – Ansul, wet
    • Fluids
      – Arctic fuel
      – Arctic coolant
    • Handrail Extension
    • Lubrication system
      – Automatic, dump or ejector body
      – Centralized, ejector body
    • Mine transfer
      – Mine transfer ready front frame (tack welded)
      – Mine transfer ready dump body (tack welded)
      – Mine transfer ready ejector body (tack welded)
    • Operators station ROPS/FOPS enclosed
      – Air conditioning
      – Cab pressurizer and filter
      – Dome light
      – Heater
      – Radio ready compartment for radio and speakers
      – Sun visor
      – Window, sliding cab door
    • Park brake switch engagement
      – Push to apply
      – Pull to apply
    • Payload
      – Truck Payload Measurement System (TPMS)
      – Remote display for TPMS
    • Reflective tape
    • Rims
      – Rim identification numbering
      – Spare, tubeless
    • Seat
      – Suspension seat Cat Comfort TLV2, vinyl
      – Suspension seat tee, mechanical
    • Seat cover
      – Tee and Cat Comfort TLV2
      – Seat cover, companion
    • Secondary steering system
    • Service tools
      – Collet jacking bolts, dump or ejector
      – Diagnostics box
      – Hoist cylinder supports (for body removal)
      – Brake wear gauge
      – Reference parts manual for additional tooling available
    • Switches
      – Engine shutdown, fire suppression activation
      – Idle timer
      – Engine shutdown, fire suppression activation/idle timer
    • Technology
      – Product Link Elite (PLE) system
    • Tire arrangements
      – Tire, 29.5 × R29 VSNT Bridgestone
      – Tire, 29.5 × R29 VSDL Bridgestone
    • Torque converter, high altitude, 3000 m (9,842 ft) and up
    • NOTE: Not all features are available in all regions. See your Cat dealer for more information.
×