R1300G Underground Mining Loader

  • Exterior View
  • Interior View
Request a Quote

Engine

Engine Model
Cat® 3306B DITA
Rated Power
2,200 rpm
Gross Power – SAE J1995
165 hp
Bore
5 in
Stroke
6 in
Displacement
641 in3
Engine Model
Cat® 3306B DITA
Rated Power
2,200 r/min
Bore
5 in
Stroke
6 in
Displacement
641 in³
Gross Power - SAE J1995
165 HP
Note (1)
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3)
Engine derate will commence at an altitude of 4500 m (14,763.7 ft).
Engine Power - Stage V Engine - ISO 14396:2002
157 HP
Engine Power - ISO 14396:2002
157 HP

Operating Specifications

Nominal Payload Capacity
14,991 lb
Gross Machine Mass
61,178 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal
45,360 lb
Static Tipping Load - Full Turn - Lift Arms Horizontal
39,397 lb
Breakout Force - SAE
26,504 lb
Nominal Payload Capacity
14,991 lb
Gross Machine Mass
65,482 lb
Rated Payload
14,991 lb

Weights

Empty
46,187 lb
Loaded
61,178 lb
Empty – Front Axle
17,967 lb
Empty – Rear Axle
28,220 lb
Loaded – Front Axle
41,050 lb
Loaded – Rear Axle
20,128 lb
Empty
45,691 lb
Loaded
60,682 lb
Empty - Front Axle
16,810 lb
Empty - Rear Axle
28,881 lb
Loaded - Front Axle
41,105 lb
Loaded - Rear Axle
19,577 lb
Note
*Calculated weights.
Operating Mass + Rated Payload* - Rear Axle
19,577 lb
Operating Mass*
45,691 lb
Operating Mass* - Front Axle
16,810 lb
Operating Mass* - Rear Axle
28,881 lb
Operating Mass + Rated Payload*
60,682 lb
Operating Mass + Rated Payload* - Front Axle
41,105 lb

Turning Dimensions

Outside Clearance Radius
226 in
Inner Clearance Radius
111 in
Articulation Angle
42.5°
Axle Oscillation
10°
Outside Clearance Radius
225 in
Inner Clearance Radius
111 in
Articulation Angle
42.5°

Transmission

Forward 1
3 mph
Forward 2
6 mph
Forward 3
11 mph
Forward 4
15 mph
Reverse 1
3 mph
Reverse 2
5 mph
Reverse - 3
9 mile/h
Reverse - 4
14 mile/h
Forward - 1
3 mile/h
Forward - 2
5 mile/h
Forward - 3
9 mile/h
Forward - 4
16 mile/h
Reverse - 1
3 mile/h
Reverse - 2
5 mile/h

Tires

Tire Size
17.5 × R25 VSMS
Tire Size
17.5 × R25

Standards

Brakes
ISO 3450, AS2958.1, CAN-CSA424.30-M90
Cab/FOPS
ISO 3449, SAE J231, AS2294.3, EN13627
Cab/ROPS
ISO 3471, SAE J1040, AS2294.2, EN13510
Brakes
ISO 3450, AS2958.1, CAN-CSA424.30-M90
Cab - FOPS
ISO 3449, SAE J231, AS2294.3, EN13627
Cab - ROPS
ISO 3471, SAE J1040, AS2294.2, EN13510
Standards
ROPS/FOPS Certified Cab
Standards
ROPS/FOPS Certified Cab

Service Refill Capacities

Engine Crankcase with Filter
7 gal
Transmission
12 gal
Hydraulic Tank
23 gal
Cooling System
18 gal
Front Differential and Final Drives
10 gal
Rear Differential and Final Drives
11 gal
Fuel Tank
78 gal
Cooling System
18 gal (US)
Engine Crankcase - With Filter
7 gal (US)
Front Differential and Final Drives
10 gal (US)
Fuel Tank
78 gal (US)
Hydraulic Tank
23 gal (US)
Rear Differential and Final Drives
11 gal (US)
Transmission
12 gal (US)

Bucket Capacities

Bucket Capacities
2.5-3.4 m³ (3.2-4.4 yd³)
Dump Bucket - 1
3 yd³
Dump Bucket - 2
4 yd³
Dump Bucket - 3 - Standard Bucket
4 yd³
Dump Bucket - 4
4 yd³
Ejector Bucket
3 yd³

Hydraulic Cycle Times

Raise
5 s
Dump
2 s
Lower, Empty, Float Down
2 s
Total Cycle Time
9 s

Engine Power

Engine Power - ISO 14396:2002
157 HP

SAFETY

  • Large window openings for increased visibility.
  • Large grab handles on both sides to provide 3-point access to cab and machine.
  • Integrated Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) resiliently mounted to the frame.
  • Service brake system actuated by modulated hydraulic pressure, and parking brake function that is spring-applied and fluid-released, assuring braking in the event of loss of hydraulic failure.
  • Safer service with hot and cold side of engine, hinged belly guards, lift arm support pins, ground-level compartment sight gauges, transmission oil dipstick located away from articulation point, and secondary engine shut-off switch at ground level.

OPERATOR COMFORT & CONTROL

  • Optional enclosed design that provides fresh, pressurized, temperature-controlled air circulation with air conditioning.
  • Optional sound-suppressed cab for a quiet, secure working environment.
  • Controls, levers, switches and gauges positioned to maximize productivity and minimize fatigue, plus STIC™ system that makes it possible to control the complete mobility of the machine with a single controller.
  • Four corner oil-cooled braking system, which provides excellent control.
  • Oscillating rear axle, which ensures four-wheel ground contact for maximum traction and stability at all times, plus a no-spin rear differential that reduces tire wear and maximizes traction in uneven terrain.

PRODUCTIVITY & PERFORMANCE

  • Electronically controlled power shift transmission that delivers smooth, responsive tramming performance.
  • High hydraulic flow rates that provide fast hydraulic and cylinder response and powerful lift forces, plus large-bore tilt and lift cylinders that deliver exceptional strength, performance and durability.
  • Superior bucket reach and bucket dump for better loading and faster bucket emptying.
  • Proven Z-bar loader linkage geometry, which generates powerful breakout force and an increased rack back angle for better bucket loading and material retention.
  • Optional ride control system that reduces fore and aft pitch of the lift arm and bucket, giving operators confidence to travel at speeds above 5 km/h (3 mph) during load and carry operations for fast cycle times.

POWER & EFFICIENCY

  • Efficient and powerful Cat 3306B engine, which delivers maximum performance in the most demanding mining applications and is tolerant to contamination and compatible with high-sulfur fuels for worldwide use.
  • Complete system integration of the engine and transmission to ensure fuel efficiency and smooth operation.
  • Unequalled lugging force while digging, tramming and traversing steep grades, plus torque rise that effectively matches transmission shift points for maximum efficiency and fast cycle times.
  • Superior powertrain efficiency thanks to high-capacity torque converter that delivers more power to the wheels.
  • Optional factory-installed remote-control system.

BUCKETS AND G.E.T.

  • Buckets designed for optimal loadability and structural reliability, with four dump bucket sizes and one ejector bucket option — all designed and manufactured to match their performance capabilities.
  • Welded, bolted or hammerless Ground Engaging Tools (GET) to meet site-specific needs and fit with site maintenance strategy.
  • Cat Modular Segment Welded GET System, which deliver welded part reliability with the replacement simplicity of a mechanical system.
  • Bolt-On Half Arrow (BOHA) GET for bucket edges, which offer more wear material than standard weld-on GET, and features a bolt-on design that enables fast and easy removal and replacement.
  • Cat Bucket Pro App, which provides real-time data on GET performance to help you plan maintenance, manage inventory and know cost-per-ton.

RELIABILITY & DURABILITY

  • Frame that is engineered to withstand extreme forces generated during loading and tramming cycles, with deep penetration and consistent welds throughout.
  • Oil-cooled pistons that increase heat dissipation and promote longer piston life.
  • Spread hitch design, which widens the distance between upper and lower hitch plates to distribute forces and increase bearing life, and thicker hitch plates reduce deflection.
  • Heavy duty steel lift arms with cast steel cross-tube to ensure extreme loads encountered during loading and tramming are efficiently dissipated for long service life.
  • Frame, powertrain, engine and components that are built to be rebuilt.

SERVICEABILITY

  • Reduced maintenance through more robust structures, modular and longer-lasting components, parts commonality, more accessible maintenance areas and extended service intervals.
  • Easier service access thanks to modular radiator with swing-out grill and ground-level access to all tanks, filters, lubrication points and compartment drains.
  • Downtime-reducing features such as radial seal air filters that are easy to change, built-in sight gauges for fluid level checks, sealed electrical connectors, covered harnesses, no cable in outer articulation area, and color- and number-coded wires.
  • Cat Electronic Technician (Cat ET) service tool, which enables quick electronic diagnosis of machine performance and key diagnostic data for effective maintenance and repairs.
  • Field-proven Cat high pressure XT hydraulic hoses that are exceptionally strong and flexible for maximum system reliability and long life in the most demanding conditions.

SUSTAINABILITY

  • Ongoing research and development into engine compatibility with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels, plus power options like electrification.
  • Optional Flow-Through Diesel Particulate Filter (DPF), which delivers a greater than 50% Diesel Particulate Matter (DPM) reduction in the exhaust.
  • Cat Rebuild and Cat Reman programs, which preserve raw materials, conserve energy and reduce emissions.
  • Retrofits and upgrades, which enhance and improve older machines to incorporate efficiency improvements and emission reductions, and to keep them in production longer to conserve energy, lower emissions and minimize the need for raw materials.
  • Electrical
    • Alternator, 75-amp
    • Receptacle group, auxiliary start
    • Battery Disconnect Switch, Ground Level
    • Starter, electric, 24-volt
    • Diagnostic Connector
    • Engine Shutdown Switch
    • Lighting:
      – External, front, rear
      – Stop, single
    • Batteries, low maintenance
    • Alarm, reversing
    • Starting and Charging System
  • Tires, Rims, And Wheels
    • Rims:
      – Tubeless, set of four
    • Tires must be selected from the Mandatory Attachments section, choose between:
      – Tire, 17.5 × R25 VSMS L5S Bridgestone
      – Tire, 17.5 × R25, VSDL Bridgestone
  • Operator Environment
    • Caterpillar Electronic Monitoring System (CEMS), (dash instrument panels)
    • Horns, electric
    • Instrumentation/gauges:
      – Speedometer/tachometer
      – Fuel level
      – Hydraulic oil temperature
      – Engine coolant temperature
    • Light, warning, residual brake
    • Pilot Hydraulic Implement Controls, Single Joystick
    • Cab, ROPS and/or FOPS certified
    • Steering and Transmission Integrated Control (STIC™) Steering
    • Seat, Suspension Tee with retractable seat belt
  • Power Train
    • Engine:
      – Cat 3306B six cylinder, diesel
      – DITA (Direct Injection, Turbocharged, Aftercooled)
    • Precleaner, engine air intake
    • Fuel Priming Aid
    • Brakes, full hydraulic enclosed wet multiple-disc (SAFR)
    • Heat Shields
    • Torque Converter
    • Transmission Neutralizer
    • Transmission, automatic planetary power shift (4F/4R)
  • Other Standard Equipment
    • Guards, engine and transmission
    • Bucket Dump (3.1 m3/4.1 yd3)
    • Catalytic Exhaust Purifier/Muffler
    • Cap, Radiator Manual Release
    • Decals, International Picto Graphics
    • Service oil sample
    • Fenders, Front, Rear
    • Firewall
    • Handholds
    • Hydraulic Oil Cooler, Swing Out
    • Valve, drain, transmission oil filter
    • Protection bars, rear frame
    • Radiator Grill, Swing Out
  • Tires, Rims, And Wheels
    • Rims:
      – Tube, set of four
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
  • Optional Equipment
    • After-Treatment Options
      – DPF (Flow Through)
    • Brake Release Arrangements, Includes Steering Release
      – Recovery Hook
      – Recovery Bar
    • Bucket:
      – Cutting Edge, Bolt-On
      – Cutting Edge, Cat Weld On
      – Heel Shrouds, Ejector and Dump Buckets
      – Lip Fully Welded or Tack Welded
      – Mechanically Attached Wear Plate System (MAWPS)
      – Various Sizes, Dump (2.5 m3/3.2 yd3, 2.8 m3/3.7 yd3, 3.4 m3/4.4 yd3), Ejector (2.4 m3/3.1 yd3)
      – Standard Lip or Bolt-On Lip
      – Wear Bars, Ejector and Dump Buckets
      – Wear Liner
    • Covers:
      – Guard, for lift arm and front frame lights
      – Rear Grill (Additional Bolt-On Guard)
    • Draw Bar Attachment, Bolt-On
    • Fast Fill System:
      – Coolant
      – Engine Oil
      – Fuel
      – Hydraulic Oil
      – Transmission Oil
    • Fluids
      – Arctic Fuel
      – Arctic Coolant
    • Lifting Group, Mine Transfer
    • Lubrication System
      – Automatic
      – Centralized
    • Operators Station ROPS/FOPS Enclosed
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement
      – Push to Apply
      – Pull to Apply
    • Reflective Tape
    • Remote Control Interface (excludes Transmitter and Receiver), Includes Warning Lights (Green)
      – Cattron
      – RCT
    • Reversible Steering
    • Ride Control System
    • Rim
      – Tube Type
      – Tube or Tubeless (chain ready)
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
    • Secondary Steering System
    • Service Tools
      – Recovery Bar (for use with Brake Release, Recovery Bar System)
      – Reference Parts Manual for Additional Tooling Available
    • Switches
      – Idle Timer
      – Lift Arm Positioner
      – Transmission Neutralizer Override Switch
      – Transmission Pressure ABA Park Brake Engagement
  • Operator Environment
    • Operator's Station ROPS/FOPS Enclosed:
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Instrumentation/gauges:
      – Brake pressures
    • Secondary Steering System
  • Power Train
    • Engine:
      – After-Treatment Options – DPF (Flow Through)
    • Reversible Steering
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement – Push to Apply/Pull to Apply
    • Radiator, High Efficiency
×