Engine - Tier 4 Final/EU Stage V
- Bore
-
4 in
- Gross Power (SAE J1995:2014)
-
284 HP
- Displacement
-
428 in³
- Net Power (SAE J1349:2011)
-
249 HP
- Stroke
-
5 in
- Emissions
-
Meets U.S. EPA Tier 4 Final/EU Stage V emission standards
- Peak Torque - 1,400 rpm
-
902 lb-ft @ 1400 rpm
- Rated Speed
-
2,200 r/min
- Engine Model
-
Cat® C7.1: configured for two emissions options
- Torque Rise
-
52%
- Net Power (ISO 9249:2007)
-
249 HP
- Engine Power (ISO 14396:2002)
-
275 HP
- High Idle Speed
-
2,270 r/min
- Low Idle Speed
-
800 r/min
- Maximum Altitude without Derating
-
9,843 ft
- Note
-
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
- Torque Rise
-
26%
- Displacement
-
5 in
- Net Power (SAE J1349:2011)
-
249 HP
- Rated Speed
-
2,200 r/min
- Stroke
-
5 in
- Peak Torque - 1,400 rpm
-
749 lb-ft @ 1400 rpm
- Bore
-
4 in³
- Gross Power (SAE J1995:2014)
-
286 HP
- Emissions
-
Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Engine Model
-
Cat® C7.1: configured for two emissions options
- Engine Power (ISO 14396:2002)
-
275 HP
- High Idle Speed
-
2,270 r/min
- Low Idle Speed
-
800 r/min
- Maximum Altitude without Derating
-
9,843 ft
- Note
-
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Wheels
- Drum Width
-
39 in
- Drum Diameter
-
41 in
- Outside Diameter
-
56 in
- Tips per Wheel
-
60
- Weight
-
9,720 lb
- Width - Over Drums
-
128 in
- Tips per Row
-
12
- Replaceable
-
Weld On
- Width Between Drums
-
50 in
- Tip Height
-
8 in
Axles
- Front
-
Planetary – Fixed
- Rear
-
Planetary – Oscillating
- Oscillation Angle
-
±10
Blades
- Maximum Depth of Cut
-
1 ft
- Maximum Lift Above Ground
-
3 ft
- Total Tilt Adjustment
-
2 ft
- Width - Over End Bits
-
12 ft
- Blade Tilt Angle - Left - Hydraulic
-
5,5°
- Height - Including Cutting Edge
-
3 ft
- Width - Moldboard Length
-
12 ft
- Blade Tilt Adjustment - Right
-
1 ft
- Blade Tilt Adjustment - Left
-
1 ft
- Blade Tilt Angle - Right - Hydraulic
-
4,8°
- Capacity
-
3 yd³
- Overall Width
-
12 ft
- Height
-
3 ft
- Digging Depth
-
1 ft
- Ground Clearance
-
3 ft
- Maximum Tilt
-
1 ft
- Turning Radius - Outside Corner of Blade
-
21 ft
- Turning Radius - Inside Face of Pusharm
-
8 ft
- Weight
-
1,764 lb
- Total Operating Weight
-
49,652 lb
Dimensions (Approximate)
- Centerline of Rear Axle to Bumper
-
7 ft
- Height - Top of Exhaust Pipe
-
11 ft
- Turning Radius - Inside of Push Arms
-
8 ft
- Hitch to Centerline of Front Axle
-
6 ft
- Height - Top of Beacon
-
13 ft
- Ground Clearance - Bumper
-
2 ft
- Ground Clearance
-
1 ft
- Width - Over Wheels
-
11 ft
- Height - Top of Hood
-
9 ft
- Length - With Blade on Ground
-
23 ft
- Height - Top of Cab Roof
-
12 ft
- Wheel Base
-
11 ft
- Ground Clearance to Bottom of Bumper
-
2 ft
- Height to Top of Radiator Guard
-
8 ft
- Ground Clearance to Transmission Guard
-
1 ft
- Centerline of Rear Axle to Bumper
-
7 ft
- Overall Machine Length with Straight Blade
-
24 ft
- Width over Platform
-
10 ft
- Ground Clearance to Hitch
-
1 ft
- Height to Top of GPS Antenna
-
12 ft
- Overall Machine Length with EU Suppression
-
25 ft
Service Refill Capacities
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only)
-
4 gal (US)
- Differential - Final Drives - Front
-
17 gal (US)
- Fuel Tank
-
132 gal (US)
- Cooling System - Tier 3/Stage IIIA Equivalent
-
19 gal (US)
- Note
-
All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA
- Engine Crankcase
-
5 gal (US)
- Differential - Final Drives - Rear
-
17 gal (US)
- Hydraulic Tank Only
-
20 gal (US)
- Transmission
-
15 gal (US)
- Cooling Systems - Tier 4 Final/EU Stage V
-
21 gal (US)
- Diesel Exhaust Fluid Tank*
-
4 gal (US)
Engine
- Low Idle Speed
-
800 r/min
- Maximum Altitude - Without Derating
-
9,843 ft
- High Idle Speed
-
2,270 r/min
Transmission
- Travel Speeds - Forward - Third
-
11 mile/h
- Travel Speeds - Forward - Second
-
8 mile/h
- Travel Speeds - Reverse - Second
-
9 mile/h
- Travel Speeds - Forward - First
-
4 mile/h
- Transmission Type
-
Cat Planetary Power Shift
- Travel Speeds - Reverse - First
-
5 mile/h
- Travel Speeds - Reverse - Third
-
11 mile/h
Hydraulic System - Steering
- Steering Pressure Limited
-
4,003 psi
- Steering System - Pump
-
Piston – Variable Displacement
- Vehicle Articulation Angle
-
84 degrees
- Steering System - Circuit
-
Pilot, Load Sensing
- Maximum System Flow
-
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
- Maximum Flow at 2,200 rpm
-
39 gal/min
- Relief Valve Setting - Steering
-
4,003 psi
- Total Steering Angle
-
84
- Steering Cycle Times - High Idle
-
3 s
- Steering Cycle Times - Low Idle
-
8 s
Braking System
- Parking Brake
-
Drum and Shoe, Spring Applied, Hydraulic Released
- Service Brakes
-
Single Disc Wet (Enclosed) 2 WHL
Hydraulic System
- Tilt Cylinder, Double Acting - Bore and Stroke
-
101.6 mm × 167 mm (4 in × 6.6 in)
- Lift Cylinder, Double Acting - Bore and Stroke
-
101.6 mm × 627 mm (4 in × 24.7 in)
- Pump Flow at 2,111 rpm
-
24 gal/min
- Maximum Supply Pressure
-
2,930 psi
- Main Relief Pressure
-
3,190 psi
Sound Performance - Tier 4 Final/EU Stage V - Suppression
- Machine Sound Level (ISO 6395)
-
109 dB(A)
- Note (3)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Level (ISO 6396)
-
70 dB(A)
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (4)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Operator Sound Level (ISO 6396)
-
70 dB(A)
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (4)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (3)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Level (ISO 6395)
-
112 dB(A)
- Operator Sound Level (ISO 6396)
-
70 dB(A)
Sound Performance - Tier 4 Final/EU Stage V - Standard
- Machine Sound Level (ISO 6395)
-
111 dB(A)
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (3)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (2)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Operator Sound Level (ISO 6396)
-
70 dB(A)
- Note (4)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
- Note (3)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Level (ISO 6395)
-
110 dB(A)
- Note (4)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Operator Sound Level (ISO 6396)
-
70 dB(A)
Operating Specifications - Tier 4 Final/EU Stage V
- Operating Weight
-
49,652 lb
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
-
Pilot operated LS valve with EH
- Lift/Tilt System
-
Variable displacement piston
- Maximum Flow at 2,200 rpm
-
24 gal/min
- Relief Valve Setting - Lift/Tilt
-
3,190 psi
- Pilot System
-
Open center, fixed displacement gear
- Pilot Relief Valve Setting
-
3,046 psi
Sound Performance - Tier 4 Final/EU Stage V - Suppression EU
- Machine Sound Level (ISO 6393)
-
107 dB(A)
- Note (1)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.