836 Landfill Compactor

  • Exterior View
  • Interior View
Request a Quote

Engine

Gross Power
562 HP
Net Power
496 HP
Engine Model
Cat® C18
Bore
6 in
Stroke
7 in
Displacement
1,105 in³
Net Power - SAE J1349 - Direct Drive - Torque Rise
52 %
Net Power - SAE J1349 - Direct Drive - Gross Power
496 HP
Rated Power (Lab)
555 HP
Rated Power (Net ISO 14396)
553 HP
High Idle Speed
2,120 r/min
Maximum Altitude - Without Derating
7,500 ft
Low Idle Speed
750 r/min
Emissions
Option 1 - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014
Emissions
Option 2 - Brazil MAR-1, equivalent to U.S. EPA Tier 3/EU Stage IIIA
Net Power - SAE J1349 - Converter Drive - Torque Rise
52 %
Gross - SAE J1349
562 HP
Net Power - SAE J1349 - Converter Drive - Gross Power
496 HP
Maximum Gross Torque - 1,300 rpm
2,275 ft·lbf
Torque Rise
52 %
Torque Rise
52%
Gross Power - SAE J1995:2014
562 hp
Net Power - SAE J1349:2011
496 hp
Net Power - ISO 9249:2007
502 hp
Rated Speed
1900 rpm
Peak Torque ( 1,400 rpm )
2,275 lbf·ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Engine Power - ISO 14396:2002
553 hp
Gross Power - SAE J1995:2014
562 hp
Net Power - SAE J1349:2011
496 hp
Net Power - ISO 9249:2007
502 hp
Rated Speed
1900 rpm
Engine Power - ISO 14396:2002
553 hp

Operating Specifications - Tier 4 Final/EU Stage V

Operating Weight
124,063 lb

Transmission

Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
4 mile/h
Direct Drive - Forward 2
8 mile/h
Direct Drive - Reverse 1
5 mile/h
Direct Drive - Reverse 2
8 mile/h

Hydraulic System

Bore (1)
5 in
Stroke (1)
29 in
Maximum Supply Pressure
4,640 psi
Main Relief Pressure
3,495 psi
Stroke (2)
40 in
Bore (2)
6 in
Lift System
Double Acting Cylinder
Hydraulic System
Flow Sharing Implement
Vehicle Articulation Angle
86°
Steering System
Double Acting – End Mounted
Pump Flow at 2,006 rpm
66 gal/min

Hydraulic System - Steering

Steering System - Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System - Pump
Piston – Variable Displacement
Relief Valve Setting - Steering
3,495 lb/in²
Total Steering Angle
86°
Steering Cycle Times - High Idle
4 s
Steering Cycle Times - Low Idle
6 s
Max Flow @ 2000 rpm
79 gpm

Braking System

Parking Brake
Spring Applied, Hydraulic Released
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL

Service Refill Capacities

Fuel Tank
209 gal (US)
Diesel Exhaust Fluid Tank*
9 gal (US)
Cooling Systems - Tier 4 Final/EU Stage V
40 gal (US)
Cooling Systems - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
37 gal (US)
Engine Crankcase
16 gal (US)
Transmission
22 gal (US)
Differential - Final Drives - Front
49 gal (US)
Differential - Final Drives - Rear
50 gal (US)
Hydraulic System - Implement/Steering
46 gal (US)
Hydraulic Tank Only
27 gal (US)
Cooling System - Tier 3/Stage IIIA Equivalent
37 gal (US)
Note
Cat U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels*
Diesel Exhaust Fluid Tank
9 gal (US)

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°

Service Brake

Brakes
Multi Disc Wet (Enclosed) 2 WHL

Parking Brake

Brakes
Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V - Standard

Operator Sound Level (ISO 6396)
72 dB(A)
Machine Sound Level (ISO 6395)
111 dB(A)

Sound Performance - Tier 4 Final/EU Stage V - Suppression

Machine Sound Level (ISO 6395)
109 dB(A)
Operator Sound Level (ISO 6396)
72 dB(A)

Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression

Operator Sound Level (ISO 6396)
72 dB(A)

Weights

Operating Weight
123,319 lb

Cab

Interior Sound Level - Standard
72 dB(A)
Exterior Sound Level - Suppression
109 dB(A)
Interior Sound Level - Suppression
71 dB(A)
Exterior Sound Level - Standard
111 dB(A)

Operating Specifications

Maximum Operating Weight (Tier 3/Stage IIIA equivalent) - Multiple Blade and Wheel Offerings
125,622 lb
Maximum Operating Weight (Tier 4 Final/Stage IV/Korea Tier 4 Final) - Multiple Blade and Wheel Offerings
123,319 lb
Operating Weight - With Full Tank Capacities and U-Blade (Tier 4 Final/Stage IV/Korea Tier 4 Final)
123,319 lb
Operating Weight - With Full Tank Capacities and U-Blade (Tier 3/Stage IIIA Equivalent)
122,615 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
125,622 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
126,364 lb
Operating Weight (Tier 4 Final/Stage V)
124,063 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
123,321 lb

Dimensions (Approximate)

Height - Top of Cab with A/C
15 ft
Height - Top of Exhaust Pipe
15 ft
Height - Top of Hood
11 ft
Ground Clearance - Bumper
3 ft
Centerline of Rear Axle to Edge of Counterweight
10 ft
Hitch to Centerline of Front Axle
8 ft
Wheel Base
15 ft
Width - Over Wheels
14 ft
Height - Top of Cab with Strobe
16 ft
Length - With Blade on Ground - Straight Blade
33 ft
Height - ROPS/Canopy
14 ft
Turning Radius - Inside of Wheels
12 ft
Ground Clearance
2 ft
Height to Top of Beacon
15 ft
Height to Top of Air Conditioning Condenser
15 ft
Height - Cab Roof
14 ft
Ground Clearance to Hitch
2 ft
Ground Clearance to Bottom of Bumper
3 ft
Centerline of Rear Axle to Rear Compactor Guard
11 ft
Width over Front Striker Bars
13 ft
Width over Rear Striker Bars
13 ft
Width over Platform
11 ft
Width over Drums
14 ft
Ground Clearance to Transmission Guard
2 ft
Overall Machine Length with Semi U-Blade
36 ft

Wheels and Tips

Diameter - With Tips
7 ft
Tips per Wheel
40
Drum Diameter
6 ft
Drum Width
5 ft

Engine - Tier 4 Final/EU Stage V

Gross Power (SAE J1995:2014)
562 hp
Net Power (SAE J1349:2011)
496 hp
Net Power (ISO 9249:2007)
502 hp
Engine Model
C18
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Rated Speed
1,900 r/min
Torque Rise
52
Bore
6 in
Stroke
7 in
Displacement
1,105 in³
High Idle Speed
2,120 r/min
Low Idle Speed
750 r/min
Maximum Altitude without Derating
7,500 ft
Note
*Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Peak Torque - 1,400 rpm
2,275 lbf·ft
Engine Power (ISO 14396:2002)
553 hp

Straight Blade

Capacity
26 yd³
Height
7 ft
Height of Cutting Edge
4 ft
Turning Radius - Inside of Wheels
12 ft
Weight
6,894 lb
Total Operating Weight
123,000 lb
Overall Width
17 ft
Digging Depth
1 ft
Ground Clearance
6 ft
Turning Radius – Outside Corner of Blade
29 ft

Semi U-Blade

Capacity
29 yd³
Height
8 ft
Overall Width
17 ft
Height of Cutting Edge
4 ft
Digging Depth
1 ft
Ground Clearance
6 ft
Turning Radius – Outside Corner of Blade
29 ft
Turning Radius – Inside of Wheels
12 ft
Weight
7,963 lb
Total Operating Weight
124,063 lb

U-Blade

Capacity
34 yd³
Height
7 ft
Overall Width
17 ft
Height of Cutting Edge
4 ft
Digging Depth
3 ft
Ground Clearance
4 ft
Turning Radius – Outside Corner of Blade
29 ft
Turning Radius – Inside of Wheels
12 ft
Weight
7,696 lb
Total Operating Weight
123,785 lb

Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA

Operating Weight
123,321 lb

Wheels

Combination Tips (Weight Group)
28,250 lb
Plus Tips - Weight (Group)
29,784 lb
Paddle Tips - Weight (Group)
272,227 lb
Chopper Tips (Weight Group)
28,404 lb
Outside Diameter
84 in
Drum Diameter
70 in
Drum Width
55 in
Feet Per Row
8
Feet Per Wheel
40
Replaceable
Weld on
Width Over Drums
4,280 mm
Tip Height
179 mm
Diamond Tips Weight (Group)
32,659 lb
Outside Diameter - Diamond
84 in
Tip Height - Diamond
7 in

Hydraulic System - Lift

Lift System - Circuit
Flow Sharing Implement; Pilot Operated LS Valve w/EH
Lift System - Pump
Variable displacement piston
Max Flow @ 2000 rpm
79 gpm
Relief Valve Setting - Lift
4,206 psi
Cylinders, Double Acting: Lift, Bore, Stroke
137.9 mm x 1021 mm (5.5 in x 40.2 in)
Pilot System
Variable displacement piston
Pilot Relief Valve Setting
551 psi

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system con

Sound Performance - Tier 4 Final/EU Stage V

Operator Sound Level (ISO 6396:2008) - Standard
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
111 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
109 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Level (ISO 6396:2008) - Standard
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
112 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
112 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
112 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
109 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

OPERATOR COMFORT AND CONTROL

BECAUSE UPTIME COUNTS

POWERFUL EFFICIENCY

PRODUCTIVITY WITH TECHNOLOGY

LONG TERM VALUE AND DURABILITY

WHEEL TIPS BUILT TO PERFORM

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Powertrain
    • Advanced Productivity Electronic Control System (APECS)
    • Air-to-air aftercooler
    • Brakes, fully hydraulic, enclosed, wet multiple disc brakes
    • Cat Clean Emission Module (Tier 4 Final/Stage V only)
    • Electro hydraulic parking brake
    • Engine, Cat C18 configured for two emissions options: Tier 4 Final/Stage V, Korea Stage V, and Japan 2014 or Brazil MAR-1 (Tier 3/Stage IIIA equivalent)
    • Fuel priming pump, electric
    • Fuel-to-air cooler
    • Ground level emergency engine shutdown switch
    • Guard (3 piece) transmission
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking
    • Radiator, Aluminum Modular Radiator (AMR)
    • Separated cooling system
    • Starting aid (ether)
    • Throttle lock
    • Torque converter with lockup clutch (LUC)
    • Turbine precleaner, engine air intake
    • Transmission, planetary, with 2F/2R speed range control
    • Underhood ventilation system
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4-1,000 CCA)
    • Converter, 10-15 amp, 24V to 12V
    • Lighting system, LED (front and rear)
    • Lighting, access stairway
    • Starter, electric (heavy duty)
    • Starter lockout (ground level)
    • Auxiliary jump start receptacle
    • Transmission lockout (ground level)
  • Operator Environment
    • Air conditioner w/roof-mounted condenser
    • Cab, sound-suppressed and pressurized
    • Internal four-post rollover protective structure/falling objects protective structure (ROPS/FOPS)
    • Radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp) 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Coat and hard hat hooks
    • Flip-up armrest
    • Heater and defroster
    • Horn group (trumpet)
    • Hydraulic controls (floor mounted)
    • Implement hydraulic lockout
    • Light, (dome) cab
    • Lunchbox and beverage holders
    • Instrumentation, Gauges: – DEF fluid level (Tier 4 Final/Stage V) – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, Warning Indicators: – Action alert system, three category – Axle/brake oil temp, front – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp
    • Mirrors, heated, rearview (externally mounted)
    • Radio, CB (ready)
    • Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
    • Seat belt with minder, retractable, 76 mm (3") wide
    • Steering and Transmission Integrated Control (STIC™) system with lockout
    • Glass (window) - rubber mounted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
  • Wheels And Cleaner Bars
    • Striker bars
  • Guards
    • Guards, axle (front and rear)
    • Guards, cab window
    • Guards, crankcase and powertrain, hydraulically powered
    • Guard, driveshaft
    • Guard, differential
    • Guards, rear fan and grill
  • Blades
    • Bulldozer arrangement is included in the standard equipment. Bulldozer blades are optional.
  • Fluids
    • Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • Other Standard Equipment
    • Auto Blade Positioner (ABP)
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access locking
    • Ecology drains for engine, radiator, hydraulic tank
    • Electronic clutch pressure control and remote mounted pressure taps
    • Emergency righthand platform exit
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Fuel tank, 793 L (210 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Hydraulic, engine, and transmission oil coolers
    • Hydraulic, steering and brake filtration/screening system
    • Oil sampling valves
    • Product Link™ - Cellular
    • Stairways, fixed-L/R (rear access)
    • Steering, load sensing
    • Vandalism protection caplocks
    • Venturi stack
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Various Blades:
    • Straight blade
    • U-blade
    • Semi U-blade
  • Various Tip And Wheel Arrangements:
    • Paddle
    • Plus
    • Diamond
  • Wheels And Cleaner Bars
    • Wheels and tips: wheel arrangements - 7" combination tips

Related Used Equipment


2019 Cat CP56B
Hours
3,661
Price
112,500
×