914 Compact Wheel Loader

Overview
Maximum Gross Power
110 HP
Maximum Net Torque - ISO 9249
327 ft·lbf
Engine Model
Cat C3.6
  • Exterior View
  • Interior View

Engine

Maximum Gross Power
110 HP
Maximum Net Torque - ISO 9249
327 ft·lbf
Engine Model
Cat C3.6
Maximum Gross Torque - ISO 14396
332 ft·lbf
Maximum Gross Power - ISO 14396 (DIN)
111 HP
Rated Net Power - ISO 9249
98 HP
Maximum Gross Power - Maximum Engine Speed
2,350 r/min
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Rated Net Power - SAE J1349
99 HP
Maximum Gross Power - ISO 14396
110 HP
Maximum Gross Power - SAE J1995
111 HP
Bore
4 in
Rated Net Power - ISO 9249 (DIN)
99 HP
Rated Net Power - Rated Engine Speed
2,200 r/min
Stroke
5 in
Displacement
220 in³
Maximum Gross Torque - SAE J1995
335 ft·lbf
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Net Torque - SAE J1349
329 ft·lbf
Maximum Gross Power - Rated Engine Speed
1,800 r/min
Maximum Gross Power - ISO 14396 (metric)
112 HP

Weights

Operating Weight
19,103 lb

Buckets

Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)

Steering

Maximum Flow - Steering Pump
22 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
4 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3 s
Maximum Working Pressure - Steering Pump
3,263 psi
Steering Articulation Angle - Each Direction
40 °

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3,046 psi
Maximum Flow - Implement Pump
39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3,046 psi
Hydraulic Cycle Time - Total Cycle Time
13 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
Hydraulic Cycle Time - Dump, at Maximum Reach
1 s
Relief Pressure - Tilt Cylinder
4,931 psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min
Maximum Working Pressure - Implement Pump
4,061 psi
Hydraulic Cycle Time - Rackback
2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
4 s

Service Refill Capacities

Cooling System
6 gal (US)
Fuel Tank
44 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential
2 gal (US)
Hydraulic System - Including Tank
26 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Engine Crankcase
3 gal (US)
Hydraulic Tank
15 gal (US)
Transmission
1 gal (US)
Axles - Front Center Differential
2 gal (US)

Transmission

Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25 mile/h
Forward and Reverse - Speed Range 1*
6 mile/h
Forward and Reverse - Speed Range 2*
13 mile/h

Tires

Other Choices Include
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Standard Size
17.5 R25 L2 XTLA
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Cab

ROPS
ISO 3471:2008
FOPS
EN ISO 3449:2008 (ISO 3449:2005)
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Axles

Rear
Oscillating ±11 degrees; Locking differential (Standard)
Front
Fixed; Locking differential (standard)

Cat® C3.6 Engine

EU Stage V and U.S. EPA Tier 4 Final compliant.

Cat Optimized Z-bar Loader Linkage

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

The 914 features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT), ISO (wide) and Fusion™ coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulics and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application. High Flow option allows for the use of even the most demanding work tools.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Cab

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Fork/Bucket mode and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Serviceability

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and efficient engine power delivers a balanced solution for all customer applications.

Standard Fuel Savings Features

Standard Fuel Savings Features such as Eco Mode, On Demand Cooling Fan, and Auto Engine Idle Shutdown make the 914 both powerful and fuel efficient.

×