926M Aggregate Handler Small Wheel Loader

Exterior View
Interior View

Request a Quote

Weights

Operating Weight: 28,933 lb
Operating Weight: 28,577 lb
Note: Aggregate Handler machine equipped with side guards and roading fenders.
Note (2): ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Operating Weight (2): 12 963 kg (28,577 lb)~
Operating Weight (1): 12 891 kg (28,418 lb)**
Note (1): **Aggregate Handler machine equipped with full counterweight and optional guards.

Buckets

Bucket Capacities: 2.5 m3 (3.3 yd3)
Bucket Capacities: 2.5-5.0 m3 (3.3-6.5 yd3)

Engine

Engine Model: Cat® C7.1 ACERT™
Rated Net Power: 148 HP
Maximum Rated Gross Power - ISO 14396: 168 hp
Maximum Rated Gross Power - ISO 14396 (DIN): 155 HP
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4): 1,800 r/min
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4): 153 HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4): 155 HP
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 148 HP
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 149 HP
Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 151 hp
Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4): 531 lbf-ft
Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4): 511 lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4): 517 lbf-ft
Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*): 1,600 rpm
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*): 160 hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*): 148 hp
Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 141 hp
Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 142 hp
Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 144 hp
Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*): 531 lbf-ft
Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*): 511 lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*): 517 lbf-ft
Displacement: 427 in3
Bore: 4 in
Emissions: Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Stroke: 5 in
Note: * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note: Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note: No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note: Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Maximum Gross Power: 153 hp
Engine Model: Cat® C7.1
Maximum Gross Power: 168 hp
Bore: 4 in
Stroke: 5 in
Displacement: 427 in³
Emissions: The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4): 601 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*): 586 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4): 517 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*): 517 ft·lbf
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4): 588 ft·lbf
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*): 573 ft·lbf
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*): 148 HP
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*): 146 HP
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*): 1,600 r/min
Note (1): *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2): Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3): No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4): Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 142 HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 144 HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 141 HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 151 HP
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*): 517 ft·lbf
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4): 517 ft·lbf
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4): 1,800 r/min
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4): 168 hp
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*): 1,600 r/min
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4): 170 hp
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4): 166 hp
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 164 hp
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4): 163 hp
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4): 587 ft·lbf
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*): 162 hp
Maximum Rated Gross Power - ISO 14396 (metric): 170 hp
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 156 hp
Net Power (Standard Power Mode: Range 1-3*): 1,600 r/min
Net Power (Performance Power Mode: Range 1-4): 1,800 r/min
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 156 hp
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*): 572 ft·lbf
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*): 158 hp

Steering

Steering Cylinder: Double Acting – Bore Diameter: 3 in
Steering Cylinder: Double Acting – Rod Diameter: 2 in
Steering Cylinder: Double Acting – Stroke: 17 in
Maximum Flow – Steering Pump: 34 gal/min
Maximum Working Pressure – Steering Pump: 3,500 psi
Maximum Steering Torque – 0° (Straight Machine): 37,155 lbf-ft
Maximum Steering Torque – 40° (Full Turn): 27,747 lbf-ft
Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited: 3 seconds
Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed: 2 seconds
Note: Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note: Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Maximum Flow - Steering Pump: 34 gal/min
Maximum Steering Torque - 0° (Straight Machine): 37,155 ft·lbf
Maximum Steering Torque - 40° (Full Turn): 27,747 ft·lbf
Maximum Working Pressure - Steering Pump: 3,500 psi
Note (1): Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2): Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed: 2 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited: 3 s
Steering Cylinder, Double Acting - Bore Diameter: 3 in
Steering Cylinder, Double Acting - Rod Diameter: 2 in
Steering Cylinder, Double Acting - Stroke: 17 in

Loader Hydraulic System

Maximum Flow – Implement Pump: 40 gal/min
Maximum Flow – Implement Pump: 3rd Function Maximum Flow*: 40 gal/min
Maximum Working Pressure – Implement Pump: 3,771 psi
Relief Pressure – Tilt Cylinder: 4,061 psi
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure: 3,771 psi
Relief Pressure – Tilt Cylinder: 3rd Function Relief Pressure: 4,061 psi
Lift Cylinder: Double Acting – Bore Diameter: 4 in
Lift Cylinder: Double Acting – Rod Diameter: 2 in
Lift Cylinder: Double Acting – Stroke: 29 in
Tilt Cylinder: Double Acting – Bore Diameter: 5 in
Tilt Cylinder: Double Acting – Rod Diameter: 3 in
Tilt Cylinder: Double Acting – Stroke: 22 in
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift): 5.5/6.2 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height): 1.5/1.7 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level): 2.6/2.6 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time: 9.6/10.5 seconds
Note: Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note: Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note: * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height): 1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level): 2.6/2.6 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift): 5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time: 9.6/10.5 seconds
Lift Cylinder, Double Acting - Bore Diameter: 4 in
Lift Cylinder, Double Acting - Rod Diameter: 2 in
Lift Cylinder, Double Acting - Stroke: 29 in
Maximum Flow - Implement Pump: 40 gal/min
Maximum Flow - Implement Pump - 3rd Function*: 40 gal/min
Maximum Working Pressure - Implement Pump: 3,771 psi
Note (1): Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2): Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Note (3): * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Relief Pressure - Tilt Cylinder: 4,061 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure: 3,771 psi
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure: 4,061 psi
Tilt Cylinder, Double Acting - Bore Diameter: 6 in
Tilt Cylinder, Double Acting - Rod Diameter: 3 in
Tilt Cylinder, Double Acting - Stroke: 20 in
Maximum Flow - Implement Pump - 4th Function Maximum Flow*: 40 gal/min
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure: 4,061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure: 3,771 psi
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*: 40 gal/min

Service Refill Capacities

Fuel Tank: 52 gal
Cooling System: 8 gal
Engine Crankcase: 5 gal
Transmission (Gear Box): 2 gal
Front Axles: 6 gal
Rear Axles: 6 gal
Hydraulic System (Including Tank): 42 gal
Hydraulic Tank: 24 gal
Diesel Exhaust Fluid (DEF) Tank: 5 gal
Cooling System: 8 gal (US)
Diesel Exhaust Fluid (DEF) Tank: 5 gal (US)
Engine Crankcase: 5 gal (US)
Front Axles: 7 gal (US)
Fuel Tank: 52 gal (US)
Hydraulic System - Including Tank: 42 gal (US)
Hydraulic Tank: 24 gal (US)
Rear Axles: 7 gal (US)
Transmission - Gear Box: 2 gal (US)

Transmission

Forward and Reverse: Range 1*: 1-13 km/h (0.6-8 mph)
Forward and Reverse: Range 2: 8 mph
Forward and Reverse: Range 3: 17 mph
Forward and Reverse: Range 4: 25 mph
Note: * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*: 1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2: 8 mile/h
Forward and Reverse - Range 3: 17 mile/h
Forward and Reverse - Range 4: 25 mile/h
Note: * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Cab

ROPS: ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels: – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note: * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl
Note: The Blue Angel environmental label is an optional attachment for Europe only.
ROPS: ISO 3471:2008
Declared Sound Levels: Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1): * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Note (2): The Blue Angel environmental label is an optional attachment for Europe only.
FOPS: ISO 3449:2005 LEVEL II

Operating Specificatons

Full Turn Tip Load: 17,580 lb

Power Train

Front Axle: Fixed
Front Axle - Traction Aid*: Locking differential (standard)
Rear Axle: Oscillating
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25: ± 13.5 degrees
Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees
Note: Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Rear Axle: Traction Aid (optional): Limited slip differential
Brakes: Service: Inboard wet disc
Brakes: Park: Spring applied hydraulically released
Note: Offset rims available to meet European roading requirements.
Note: **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Brakes - Parking: Spring applied hydraulically released
Brakes - Service: Inboard wet disc
Front Axle: Fixed
Front Axle - Traction Aid**: Locking differential (standard)
Note (1): Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2): Offset rims available to meet European roading requirements.
Note (3): *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Rear Axle: Oscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65: ± 10.5 degrees
Rear Axle - Traction Aid - Optional: Limited slip differential

Operating Specifications

Note (1): **Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load: 17,350 lb
Note: Aggregate Handler machine equipped with side guards and roading fenders.
Full Turn Tip Load (2): 8148 kg (17,962 lb)~
Full Turn Tip Load (1): 8047 kg (17,740 lb)**
Note (2): ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.

Air Conditioning System

Air Conditioning: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Sustainability

Recyclability: 94%

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

Saves fuel and reduces cab sound levels
Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

Automatic climate control with heated rear glass and external mirrors
Information at a glance with large primary LCD display
Heated and cooled seat option
Optional Ride Control
Exclusive electro-hydraulic cylinder snubbing
An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

Select your Power Train Mode
Reduce tire wear using Rimpull
Fine tune ground speed with Creeper Control
Adjustable Electo-Hydraulic Controls
Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

Product Link™ PRO standard with optional subscription to VisionLink®.
Maintenance reminders through secondary display at scheduled intervals.
Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
Jump start studs as standard equipment.
Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Sustainability

The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
Variable Displacement Pumps match power to load as application requirements change.

Power Train
- Axle Duo-Cone^™ seal guards
- Auto idle shut down feature
- Cat C7.1 engine
  – Power modes (Standard and Performance)
  – Power by range (High Power in Range 4)
  – Turbocharged and aftercooled
  – Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
  – Operator modes (Default, TC, Hystat, and Ice)
  – Directional Shift Aggressiveness (fast, medium, slow)
  – Rimpull control, adjust wheel torque
  – Creeper control, adjust ground speed
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Oil sampling ports
- Throttle lock and max speed limiter
Hydraulics
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Seat-mounted hydraulic joystick controls
Electrical
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Emergency shutdown switch
- Halogen work and roading lights, LED rear tail lights
- Product Link PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
Operator Environment
- 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- Cab, pressurized
- Camera, rearview
- External heated mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Mirror, single
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Suspension seat, fabric
Other Standard Equipment
- Large-access enclosure doors with adjustable close/open force
- Cat optimized Z-bar linkage with parallel lift
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures

Optional Equipment
- Autolube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Differential, limited slip, rear
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
  – Camera, rearview integrated into advanced display
  – Electrically adjustable external heated mirrors (2)
  – Secondary display to enable features and adjust parameters
  – LED interior lighting
  – Sunscreen, front and rear
  – Touchscreen secondary display
  – Ride control adjustable speed activation
  – Preventative maintenance reminders
  – Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cold start package
  – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Counterweight, additional options
- Coupler, (Fusion and ISO 23727)
- Debris packages (low, medium, high)
- Fenders (extended cover and full coverage)
- Guarding packages
- Linkage, high lift
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Payload Technology
  – Cat Production Measurement (CPM)
  – CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Rear Object Detection
- Ride Control System, adjustable through secondary display
- Seats
  – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
  – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering
  – Dual mode and secondary
- Tire Pressure Monitoring (TPM)