Exterior View
Engine
- Gross Power - SAE J1995
- 67 hp
- Net Power - SAE 1349
- 66 hp
- Displacement
- 134 in³
- Stroke
- 4 in
- Bore
- 3 in
- Peak Torque - 1,500 rpm - SAE J1995
- 153 ft·lbf
- Net Flywheel Power
- 66 hp
- Net Power - ISO 9249
- 67 hp
- Engine Model
- Cat C2.2 CRDI
Operating Specifications
- Rated Operating Capacity
- 1,900 lb
- Tipping Load
- 3,800 lb
- Breakout Force - Tilt Cylinder
- 3,928 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
- Rated Operating Capacity with Optional Counterweight
- 2,000 lb
Weights
- Operating Weight
- 6,514 lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
Dimensions
- Wheel Base
- 42 in
- Height - Top of Cab
- 80 in
- Vehicle Width over Tires
- 59 in
- Ground Clearance
- 7 in
- Departure Angle
- 27.9°
- Maximum Dump Angle
- 47.4°
- Length - Without Bucket
- 99 in
- Clearance at Maximum Lift and Dump
- 89 in
- Bucket Pin Reach - Maximum Lift
- 9 in
- Maximum Overall Height
- 151 in
- Turning Radius from Center - Machine Rear
- 60 in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery,
- Bucket Pin Height - Carry Position
- 8 in
- Length - With Bucket on Ground
- 127 in
- Bumper Overhang - Behind Rear Axle
- 35 in
- Turning Radius from Center - Bucket
- 78 in
- Maximum Reach - With Arms Parallel to Ground
- 49 in
- Bucket Pin Height - Maximum Lift
- 118 in
- Reach - Maximum Lift/Dump
- 26 in
- Rack Back Angle - Maximum Height
- 88.2°
- Turning Radius from Center - Coupler
- 43 in
Hydraulic System
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
- 26 gal/min
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 36 hp
- Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
- 3,336 psi
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 18 gal/min
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3,336 psi
- Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
- 51 hp
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Power Train
- Travel Speed - Forward or Reverse - One Speed
- 8 mile/h
- Travel Speed - Forward or Reverse - Two Speed Option
- 11 mile/h
Service Refill Capacities
- Cooling System
- 3 gal (US)
- Engine Crankcase
- 3 gal (US)
- Fuel Tank
- 15 gal (US)
- Hydraulic System
- 12 gal (US)
- Hydraulic Tank
- 9 gal (US)
- Chain Box - Each Side
- 2 gal (US)
Noise Level
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Inside Cab*
- 83 dB(A)
- Outside Cab**
- 101 dB(A)
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Quiet and Comfortable
The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.
Maximum Performance
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.
Making Your Job Easier
Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.
Optimized Machine Capability
Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.
Sustainability
- The Cat® C2.2 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
- Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
- Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.
-
Electrical
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
-
Operator Environment
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
-
Power Train
- Cat C2.2, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V emission standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- ATAAC/Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
-
Other
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link™ PL240, Cellular
-
Mandatory Equipment
- Hydraulics, Standard or High Flow
- Quick Coupler, Mechanical or Powered
- Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- EU Preparation Package (Europe only)
- Power Train: One Speed, One Speed with Ride Control, Two Speed
- Tires, 10 × 16.5
- PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower) - COMFORT PACKAGES:
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with A/C (C3): Foot Throttle, Headliner, Heater and Defroster, Air Conditioner, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
-
Optional Equipment
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Product Link PL641, Cellular
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen, Advanced Multi-operator Security System, On-screen Adjustments for Implement Response, Hystat Response, and Creep Control; Standard equipment in Europe only
- Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)
Related Used Equipment
Hours
2,590
2,590
Price
37,250
37,250
Hours
1,630
1,630
Price
46,000
46,000